Mod. FIM
LS-300 R
Special
Stone-Wash
Capacity:
300 Kgs. = 180 trousers in 1 hour
.
|
Special machine for the treatment of jeans, in
the construction of which AISI 304 stainless steel is widely used.
All the components which come into contact with water are made
of stainless steel. The thick- ness of the drum is 5 mm., the
base is 10 mm. The door - Ø 900 mm. - is made entirely
of stainless steel.
The machine functions with a PLC programmer, therefore
it can carry out pre-established cycles fully automatically and
alternatively if necessary, all the phases can be carried out
manually. - Water inlet is controlled by an electronic
litre-counter, with three different water levels which can be
programmed and appear on the display. - Temperature is
electronically controlled on three different values which appear
on the display. - Unloading of washed garments takes place
automatically by the tilting of the drum, by means of a hydraulic
piston. - Auxiliary circuits of the machine are all at
low voltage 24 V.
The working phase, the temperature and the exact amount of water
are constantly indicated in real time on the electric panel.
The transmission group equipped with self-braking motor and reverse.
The control and safety devices used were supplied by leading world
famous companies.
2nd. door (on request) - extremely practical for checking progress
during the working cycle and for taking a sample, if required.
|